FILTERS
In order to respond to our customers requirements during humanitarian emergencies, LMS France has developped its own production of sturdy HDPE filters, available from diameter 450mm to 980mm .
Filters are equipped with :
- An opening on the top, where can be fixed a multiport valve. The 8 screws embedded in the filter body guarantee a perfect fixing of the valve.
- A drain opening equipped with a strainer to facilitate the draining of water contained in the filter during a long lasting stop.
- A 2" opening to allow the draining of filtering mass for its renewal.
Top or Side valves can be installed. In case of Side valve installation, the opening on the top of the filter will be equipped with a cover and an air drain tap. Multiport valves are standard equipped with a 0-6 bars manometer and a turbidity controller useful during backwash.
|
Filters
Désignation
|
D450L640
|
D550L680
|
D650L820
|
D740L870
|
D840L940
|
D980L990
|
|
Diameter(mm)
|
450
|
550
|
650
|
740
|
840
|
980
|
|
Net weight
|
10,83 Kg
|
14,82 Kg
|
24,51 Kg
|
30,21 Kg
|
41,04 Kg
|
57 Kg
|
|
Height (mm)
|
640
|
680
|
820
|
870
|
940
|
990
|
MADE OF : Blue HDPE grade rotomolding, if other colour required, contact us.
- Width : 15 mm ou 12mm
- Resistance to impact even under cold temperature
- Abrasion resistance
- Low friction coefficient
- Quality from flexible to rigid
- Important chemical inertia
- Food grade quality
- Electrical isolation
- 8 threaded rods fixed in the mass to guarantee an optimal tightening.
- 2 threaded orifices 1" and 2".
